TAQA’s FloCheck Injection Valve is designed for treatment of the completion annulus and near wellbore in wells completed with Inflow Control Device (ICD) technology.
TAQA’s FloCheck Injection Valve is designed for treatment of the completion annulus and near wellbore in wells completed with Inflow Control Device (ICD) technology.
Inflow control devices can provide great improvements in inflow performance but are designed to either restrict or prevent fluids from passing from the production tubular into the wellbore annulus. A check valve functionality can also be beneficial during deployment to enable effective circulation of well fluids, as well as during production to prevent crossflow between zones. To bypass the ICD if chemical treatment of the annulus or near wellbore is required, the FloCheck Injection valve can be deployed to perform higher rate treatments.
The FloCheck Injection Valve is deployed within the ICD housing and can be run per joint, per zone or in multiples within a single joint, depending on the rate or placement requirements. The valve is designed for use with a wide range of fluids including acids, solvents and gas, rendering it extremely adaptable for well control.
The FloCheck Injection Valve can also be deployed in injection wells to eliminate crossflow during shut-in and prevent backflow of reservoir fluids, as well as the accompanied movement of fines and formation material into the wellbore.